Skip to main content

Attributes Reference

Dotfuscator is a post-build tool, meaning it operates on compiled .NET assemblies, not source code. Because of this, most options for how Dotfuscator protects an application are stored in a Dotfuscator config file, separate from the source code.

However, if you do have access to the source code, you can also configure some Dotfuscator features with .NET attributes.

Dotfuscator recognizes certain attributes when it processes assemblies, which configure how Dotfuscator processes the code elements the attributes annotate. By default, Dotfuscator also strips (removes) these attributes during processing, so that the shipped application does not contain sensitive configuration information.

Important: Attributes by themselves do not cause code elements to be protected. The compiled assemblies must still be processed by Dotfuscator for protection to be applied. Attributes are merely an additional way to configure the protection, alongside the use of a Dotfuscator config file.

Compatible Attributes

Dotfuscator recognizes certain attributes and ignores all others. The attributes that Dotfuscator recognizes are:

For details on each set of attributes, see the linked pages. The rest of this page covers aspects common to many attributes.

DotfuscatorAttribute

Dotfuscator, by default, inserts a custom attribute into your application named DotfuscatorAttribute. The attribute contains information about the Dotfuscator version used to obfuscate the program, including product ID (Community vs. Professional) and version numbers.

NoDotfuscatorAttribute Option

If you prefer not to insert the DotfuscatorAttribute, you can disable it by manually setting an option in the config file, called nodotfuscatorattribute.

 <dotfuscator>
    <global>
      <option>nodotfuscatorattribute</option>
    </global>
    ...
  </dotfuscator>

When to Use Attributes

Using attributes makes it easier to see, when looking at the source code, how code elements are affected by Dotfuscator. For instance, the following C# snippet uses the ObfuscationAttribute to indicate a class (but not its members) should be excluded from Renaming:

using System.Reflection;

[Obfuscation(Feature = "renaming", Exclude = true, ApplyToMembers = false)] 
private class MyClass { /* ... */ }

Adding Attributes to Code

To add attributes to your code and have Dotfuscator recognize them:

  1. Add the appropriate references to your project. For details, see:
  2. Apply compatible attributes to your code as you would any attribute.
    • The namespace (and thus the necessary using statement) varies depending on the attribute. See each attribute's section for details.

    • As with other attributes, you may omit the suffix Attribute in the usage. For instance, this is a usage of TamperCheckAttribute:

      [TamperCheck(Action = CheckAction.Exit)]
public void MyMethod()
{
   // method body
}
  1. Build your application.
  2. If using Obfuscation Attributes,configure the following settings:
  3. If using Check Attributes, configure the following settings:
    • For each assembly that contains such attributes, ensure the Honor check attributes and Strip check attributes options are enabled.

Interacting with Application Code

Existing application code can receive information from code injected by Dotfuscator. Such application code is known as a sink.

Note: Sinks are not to be confused with the methods a Check targets. Those are known as the locations of a Check.

Each Check can define one or more sinks for different contexts. The sinks of a Check are defined by three of its properties:

  • An element property, which specifies the kind of code item that sink is, such as Field or Method. For more information, see the Sink Element Kinds subsection.
  • A name property, which specifies the name of the code item (if applicable).
  • An optional owner property, which specifies the type that defines the code item (if applicable). If not specified, this defaults to the type that defines the location of the Check. For more information, see the Owners subsection.

For instance, when a Check runs, it can inform the application of its result via an application notification sink. The sink can be configured through the Check's ApplicationNotificationSink properties:

  • ApplicationNotificationSinkElement
  • ApplicationNotificationSinkName
  • ApplicationNotificationSinkOwner

Details on the sinks available for a given Check are listed on the relevant sections of the Check Attributes page.

Sink Element Kinds

This section lists the kinds of code elements that can be used as a sink for injected code.

Note that the supported elements, signatures of the elements, and meaning of the values provided to the sink vary by Check. See the Check Attributes page for details.

For instance, a Check's Application Notification Sink requires a bool field or property; or a method, delegate field, or delegate method argument with signature void(bool). The Boolean value is true if the Check detected the unauthorized condition (such as an attached debugger or tampering) and false otherwise.

What follows is a list of possible values for the element property of a Check (for example, ApplicationNotificationSinkElement for a Tamper Check). The possible sink element kinds are:

  • None: The sink is disabled and no information is provided from the injected code to the application.
    • This is usually the default value for the element property.
    • The name and owner properties are ignored with this setting.
  • Method: The injected code calls a method, providing the information through the method's parameters. The method must be accessible to all locations of the Check.
    • The name property specifies the simple name of the method (for example, MyMethod, not void MyMethod(bool)).
    • The owner property specifies the type that declares the method.
  • Field: The injected code provides the information by setting a field. The field must be accessible and settable to all locations of the Check.
  • Property: The injected code provides the information by setting a property. The property and its setter must be accessible to all locations of the Check.
  • MethodArgument: The injected code calls a delegate specified by a method argument, providing the information through the delegate's parameters. The method argument must be an argument to all locations of the Check.
    • The name property specifies the name of the method argument.
    • The owner property is ignored with this setting.
  • Delegate: The injected code calls a delegate specified by a field, providing the information through the delegate's parameters. The field must be accessible to all locations of the Check.
  • DefaultAction: The injected code performs some default behavior based on the information. The exact behavior varies depending on the particular sink being configured, which can include this setting being an invalid configuration.
    • Despite its name, this is not always the default value for the element property.
    • The name and owner properties are ignored with this setting.

Owners

A sink's owner is the type that declares the sink.

Note: Some kinds of sink elements do not require a type to be specified in the owner property, and thus ignore whatever value is configured. The element types that ignore the owner property are: None, MethodArgument, and DefaultAction.

The value of the owner property is a type name is expressed including the namespace, but not the assembly name. For instance, consider a field named wasTampered on the class MyType which is declared in the namespace Outer.Inner. The properties defining a sink to this field would be as follows:

  • The element property: Field
  • The name property: wasTampered
  • The owner property: Outer.Inner.MyType

A sink may be a static member or an instance member of the owner. This distinction can affect how the owner property is used. Additionally, when using a Check with multiple locations, it is possible to have each location refer to a different owner.

For a Static Member

If the sink is a static member, then it may be defined on any type, provided it is accessible to all locations of the Check. The owner property specifies which type this is. If the property's value is blank, the type is assumed to be the type that defines the location of the Check.

For an Instance Member

If the sink is an instance member, then the following must be true:

  • The location of the Check must also be an instance member.
  • The location of the Check must be defined by the same type that declares the sink.
  • The owner property must be the name of this type, or be blank.

At runtime, the instance that was used when calling the location is also used for the sink.

Multiple Owners

When using a Check with multiple locations, each location is evaluated individually with respect to sinks. This means that each location may have a different sink, provided the following are true:

  • Each type that defines a location for the Check must have the specified sink member.
    • If a particular location is a static member, then the corresponding sink member must also be a static member.
    • If a particular location is an instance member, then the corresponding sink member may be an instance member or a static member.
  • The owner property must be left blank.
     
Was this article helpful?
日本語